Equipment Maintenance

print Print

Leather

Damp Cloth

A moist cloth will remove dust, mildew, and prevent the leather from dying out too much.

Pros Cons
Historically accurate Should be done monthly
Free No additional protection

Lanolin

Use a cloth or piece of chamois leather to apply lanolin to surface.

Pros Cons
Historically accurate Smelly & leaves oily residue
Provides protection

Source: Tony D., Lanolin Used for Metal Preservation Grease and Rome

Conditioner

A variety of leather conditioners exist to moisten and protect leather. Follow the condition instructions.

Pros Cons
Long term Not historically accurate
Provides protection Most expensive option

Wood

Mineral Oil

Wipe wooden areas down with a cloth soaked in mineral oil.

Pros Cons
Conditions Wood Should be done monthly
Brings out wood grain Not waterproof
Doesn't affect color Doesn't add protection

Linseed Oil

Apply boiled linseed oil to wooden areas with a cloth. Do this daily for a week, weekly for a month, then monthly for a year.

Pros Cons
Only has to be re-applied annually once base coat is built up Lengthy process
Brings out wood grain Turns amber over time, affecting color
Provides protection & water proofing

Metal

Rust Removal

White Wine Vinegar

Spray metal or sponge/scotch-bright pad with white wine vinegar and scrub surface.

Pros Cons
Historically accurate Can leave drip marks if left for too long
Usually quick & easy Can be time consuming if badly rusted
Cheap

Source: Metatron, How To Remove Rust From Your Armour With Only $3

Preservation

WD-40

Spray metal or cloth with WD-40 and wipe down. Technically doesn't preserve, just removes any moister, slowing down rust.

Pros Cons
Cheap No protection
Easy Short term

Lanolin

Use a cloth or piece of chamois leather to apply lanolin to surface.

Pros Cons
Historically accurate Smelly & leaves oily residue
Provides protection

Source: Tony D., Lanolin Used for Metal Preservation Grease and Rome

Linseed Oil

Using a cloth, rub metal surface in linseed oil.

Pros Cons
Historicaly accurate Leaves oily residue
Provides protection

Wax

Use a double boiler (Bowl in a pot of boiling water) to melt wax & turpentine. Use a brush to apply wax to metal surfaces.

Pros Cons
Historically accurate
Cheap & easy
Doesn't leave residue
Long term protection

Source: Robert A. Buerlein, Care and Preservation of Edged Weapons